How to Download and Install VCDS Lite 1.2 Full Version for Free
How to Download and Install VCDS Lite 1.2 Full Version for Free
VCDS Lite 1.2 is a diagnostic software for Volkswagen, Audi, Seat and Skoda vehicles that works with non-dongle interfaces. It is a continuation of the VAG-COM software that was developed in 2003 and 2004. VCDS Lite 1.2 has many features and functions that can help you diagnose and repair your car.
Vcds Lite 1.2 Full Version Download
Download File: https://www.google.com/url?q=https%3A%2F%2Fshoxet.com%2F2tKnhg&sa=D&sntz=1&usg=AOvVaw1Pw9kMyVUIzur5iCTvg3Ft
In this article, we will show you how to download and install VCDS Lite 1.2 full version for free, without any registration or activation required. You will also learn how to use VCDS Lite 1.2 to perform various diagnostic tasks on your car.
Step 1: Download VCDS Lite 1.2 Full Version
The first step is to download VCDS Lite 1.2 full version from a reliable source. You can use the link below to download the self-installing distribution file that is digitally signed and includes the VC-Scope and TDI Timing Checker plug-ins[^1^]. The file size is about 1.5 MB and it works on Windows 7, Windows 8 and Windows 10, both 32-bit and 64-bit systems.
Download VCDS Lite 1.2 Full Version
Step 2: Install VCDS Lite 1.2 Full Version
The next step is to install VCDS Lite 1.2 full version on your PC's hard disk. You cannot run it directly from a floppy or CD. To install it, follow these steps:
Run the downloaded file and follow the prompts to allow it to install itself.
Choose a location where you want to install VCDS Lite 1.2 full version.
Wait for the installation to finish.
A shortcut icon will be created on your desktop.
Step 3: Connect an Interface between Your PC and Your Car
The third step is to connect an appropriate interface between your PC and your car. You need an interface that is compatible with VCDS Lite 1.2 full version, such as a HEX, KEY, KII or Micro-CAN interface[^1^]. You can also use some old interfaces from Ross-Tech or some third-party interfaces that work with VAG-COM 311 or 409[^2^]. However, some features and functions may not be available with these interfaces.
To connect an interface between your PC and your car, follow these steps:
Plug the interface into your PC's USB port or serial port.
Plug the other end of the interface into your car's OBD-II port, which is usually located under the dashboard.
Turn the car's ignition switch ON, but do not start the engine.
Step 4: Start VCDS Lite 1.2 Full Version and Test the Connection
The final step is to start VCDS Lite 1.2 full version and test the connection between your PC and your car. To do this, follow these steps:
Start VCDS Lite 1.2 full version by double-clicking on the shortcut icon on your desktop.
Click [Options] and select the correct communication port that matches your interface.
Click [Test] to confirm that the program can use the port and find the interface.
If the test is successful, click [Save].
Click [Select] to choose a control module that you want to access.
Click [Fault Codes] to read any error codes stored in the module.
You can also use other functions such as [Measuring Blocks], [Output Tests], [Basic Settings], [Coding], [Adaptation], etc., depending on the module and the interface.
Congratulations! You have successfully downloaded and installed VCDS Lite 1.2 full version for free and used it to diagnose your car. e0e6b7cb5c